McQuay MAC Especificaciones descargar pdf (Pagina 42)

* This product must be branded. Screen saver will be deactivated for brand less panel

6.3 CMOS Reset

• CMOS reset allows user to reset some settings to default value such as:

Password -> 0001

Backlight -> Normal

Buzzer -> ON

Screen Saver -> Disable

Timeout -> 5m

Contrast -> 50%

Brightness -> Medium

Temp Unit -> C

• Procedures

1. Power OFF the panel

2. Close the jumper JH2 with the provided jumper header

3. Power ON the panel and the LCD panel should display as follow:

4. Remove the jumper header (put the jumper header on 1 pin only), power OFF and then

power ON the panel.

CM OS is resetting …………

CMOS reset completed !

Please remove JUMPER

and restart the panel

Parameter Value Description

Normal Turn ON backlight for 30s via key press

Always Always ON backlight

ON Enable beeping sound when fault/ alarm occurred

OFF Disable beeping sound when fault/ alarm occurred

Enable Show screen saver when timeout

Disable No screen save

*Timeout 1-30m Timeout for showing screen saver

Contrast 0-100% Adjust the contrast setting for the LCD panel

OFF No backlight

Low, Medium, High Adjust the backlight intensity

°C Display temperature in degree Celsius

°F Display temperature in degree Fahrenheit

Temp Unit

Backlight

Buzzer

*Screen Saver

Brightness

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 179 180

Sin comentarios

McQuay MAC Especificaciones Pagina 42