McQuay M5WSS Manual de instalación descargar pdf (Pagina 33)

• Carefully bend the pipes to the required

position to align with the hole. For right

hand and rear side draw out, hold the

bottom of the piping and fix direction

before shaping it to the desired position

(See fig. 2). The condensation drain hose

should be taped to the pipes with vinyl

tape. The electrical cable can also be

taped to the pipes.

• The refrigerant piping can be routed to

the unit in 5 direction, by using the cut

outs in the unit casing. (See fig. 1)

Mounting

Hook the indoor unit onto the upper portion of installation plate. (Engage the 2 hooks of rear top of the

indoor unit with the upper edge of the installation plate). Ensure the hooks are properly seated on the

installation plate by moving in left and right.

Preparation

Water Drainage Piping

The indoor drain pipe must be downward gradient for smooth drainage. Avoid situation as shown in figure

below.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 215 216

Sin comentarios

McQuay M5WSS Manual de instalación Pagina 33