McQuay M5WSS Manual de instalación Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 216
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Preliminary Site Survey
Electrical supply and installation is to conform to local authority’s codes and regulations. (e.g. National
Electricity Board). Voltage supply fluctuation must not exceed +/- 10% of rated voltage. Electricity supply
lines must be independent of welding transformers which can cause high supply fluctuation. Ensure that the
location is convenient for wiring and piping.
Installation of Indoor Unit
The indoor unit must be installed such a way that there is no short circuit of the cool discharge. Comply to
the installation clearance recommended. Do not put the indoor unit where there is direct sunlight on the unit.
Make sure the location is suitable for piping and drainage. Precautions steps to be taken:
i) Use the hanger supplied with the unit.
ii) Ensure the support is strong enough to withstand the weight of the unit.
iii) Use the supplied drain socket to connect the drain pipe.
Install the unit in such a way
that the condensate water can
flow out smoothly.
M5CCWS 010CR
M5CCWS 015CR
M5CCWS 020CR
22
M5CCWS 025CR
Installation For Indoor Unit M5CCWS
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 215 216

Comentarios a estos manuales

Sin comentarios