McQuay MLCV Guía para resolver problemas descargar pdf (Pagina 11)

G6 Remote Control

1 - ON / OFF SWITCH

l Press to start the air conditioner unit

l Press again to stop the unit

l Blue color - Cooling only

Pink color - Heatpump

Red color - Chilled Water Heatpump (No auto mode)

2 - TEMPERATURE SETTING

l Set the desire room temperature.

l Press button to increase or decrease the set temperature. Setting range are between 16°C to

30°C setting (60°F to 80°F)(Optional setting from 20°C to 30°C).

l Press 5 or 6 button simultaneously will toggle the temperature setting between °C and °F.

3 - AUTOMATIC AIR SWING

l Press the button to activate the automatic air swing function. The swing angle ranging from

horizontal to 25° to bottom.

4 - SLEEP MODE

l Press the button to activate sleep mode. This mode can only be activated while in cooling or

heating mode operation. If it is activated in "COOL" mode, the set temperature will be increase

0.5°C after 30 minutes, 1°C after 1 hour and 2°C after 2 hours.

l When the unit is operating under heating mode, the set temperature is decreased by 1°C after the

first half an hour, 2°C after the second half an hour and total of 3°C after the following 1 hour. This

function will prevent night sweat during summer season.

9 10

5. Handset Operating Guide

5 - TIMER SETTING

l Press set button to activate the timer setting (from 1 hour to 15 hour) of the air conditioning unit. It

will be in"On" or "Off" condition after the set time depending to the current condition (either from

"On" to Off" or vise-versa)

l To cancel the timer setting, press the button continuously until the timer display goes off.

6 - OPERATING MODES

l Press the "mode" button for select the type of operating mode.

l Cooling only unit:

Cool →Dry → Fan.

l Heatpump unit :

Cool →Dry → Fan → Heat.

7 - FAN SPEED AND VENTILATION MODE SELECTION

l Press the button until the desired fan speed is achieved.

8 - SIGNAL TRANSMISSION INDICATION

l Blink to confirm the last setting has been send to the unit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Sin comentarios

McQuay MLCV Guía para resolver problemas Pagina 11