McQuay M5WMX Especificaciones descargar pdf (Pagina 25)

Air conditioner unit opeartion

Dry mode

• When the air humidity is high, the unit can operate in

dry mode. Press <MODE> button and choose <DRY>.

• If the room temperature is 2°C higher than the set

temperature, the air conditioner will operate under

cooling mode until it reaches within the 2°C range of

difference compared to the set temperature before it

converts to dry mode.

• If the room temperature is within the 2°C range of

difference compared to the set temperature, it will

directly operate under dry mode.

• The indoor fan will operate at super low speed under

dry mood.

Heat mode (for heat pump unit only)

• When the unit is switched on from cold start or

defrosting cycle, the indoor fan will start to operate

only after the coil reaches the desired temperature.

• When compressor stops; the indoor fan will operate until

the coil temperature drops to a low level.

Horizontal air flow control

• For more effective air circulation, you can manually

adjust the air discharge grille to the left or right.

• During cool mode operation and dry mode operation,

do not direct the air discharge louver downwards for too

long. If operating continues in this way, condensation

may occur on the louver, thus resulting in drippings.

Overheating protection (for heat pump unit

only)

• In case the internal and/or the external temperature is

too high, or the filter is dirty and clogged up, the

refrigerant may be overheated. The compressor will

reduce its running speed in order to lower the temperature

of heat exchanger. If the temperature is still very high,

the compressor will stop.

Frost prevention

• When the air filter is dirty, the evaporating

temperature will decrease and eventually cause

frosting.

• When this happens, the compressor will reduce

its running speed to prevent freezing. If the coil

temperature is still very low, the compressor

will stop.

Fan speed and rated cooling capacity

• The rated cooling capacity is provided at the

maximum fan speed.

• The cooling capacity is lower when the unit

is operating at MEDIUM and LOW speed.

Turbo function

• If higher cooling or heating is required

during operation, press "Turbo" button on

the remote control to increase the cooling or

heating capacity to maximum.

• This function will operate for 15 minutes

before it resume to the actual setting.

• The fan noise may be higher if the unit

operate in “Turnbo” mode.

Horizontal

gnilooC

yrD

25˚C / 77˚F

Standard operating conditions

Cooling unit

Temperature Ts °C Th °C

Minimum indoor

temperature 19.0 14.0

Maximum indoor

temperature 32.0 23.0

Minimum outdoor

temperature 19.4 -

Maximum outdoor

temperature 46.0 -

Heat pump unit

Temperature Ts °C Th °C

Minimum indoor

temperature 16.0 -

Maximum indoor

temperature 30.0 -

Minimum outdoor

temperature -8.0 -9.0

Maximum outdoor

temperature 24.0 18.0

Ts : Dry bulb temperature Th: Wet bulb temperature

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 66 67

Comentarios a estos manuales

Sin comentarios

McQuay M5WMX Especificaciones Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Acondicionadores de aire del sistema de división McQuay M5WMX