McQuay M5MAC Guía para resolver problemas descargar pdf (Pagina 17)

4. Fan speed selection

v Press the

D button continuously will toggle the fan speed in the following order: Low ( ) –––:

Med ( ) –––: High ( ) –––: Auto

v Stop pressing when the desired fan speed appears on the display screen.

5. ON Timer Setting

v Press the SET button will activate the on timer function.

v Set the desired on time by pressing the SET button continuously. If the timer is set to 7.30am, the

air conditioner will turn on at 7.30am sharp.

v Press the CLR button to cancel the on timer setting.

6. OFF Timer Setting

v Press the SET button will activate the off timer function.

v Set the desired off time by pressing the SET button continuously.

v Press the CLR button to cancel the off timer setting.

7. Automatic Air Swing

v Press the SWING ( ) button to activate the automatic air swing function.

v To distribute the air to a specif

ic direction, press the SWING button and wait until the louver move

to the desired direction and press the button once again.

8. Sleep Mode Setting

v Press the SLEEP button will activate the sleep mode function. This function is available under

COOL, HEAT and AUTO mode.

v When the unit is operating under cooling mode, the set temperature is increased by 0.5°C after 30

minutes, 1°C after an hour, and 2°C after 2 hours.

v When the unit is operating under heating mode, the set temperature is decreased by 1°C after 30

minutes, 2°C after an hour and 3°C after 2 hours.

9. Clock Time Setting

v Press + button to increase the clock time.

v Press – button to decrease the clock time.

10. Turbo Mode

11. Ionizer

v Press the button to activate the negative Ion function, which will refresh the indoor air effectively.

12. Personalize Setting

button and hold for 3s to initiate personalized setting

v Set the individual setting e.g. MODE, SET TEMP or FAN SPEED and leave for 4s to save the

setting into the programme.

v 2 groups of settings are allowed to store in the handset. Press once to activate the P1 setting,

press again to cycle between P1 and P2.

v Press any key to deactivate the personalize setting.

Press J

Press the TURBO ( ) button to achieve the required set temperature in a short time.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 65 66

Sin comentarios

McQuay M5MAC Guía para resolver problemas Pagina 17