3 4
Wide Operating Range
MDS system undergo rigorous test to ensure superior
performance. MDS system can run in a very good condi-
tion from -15ºC to 48ºC.
The stage of the art heat-exchanger combining with the
high efficiency compressor promotes rapid exchange
between refrigerant and air, ensuring set temperature to
be achieved faster compared to traditional air-
conditioning system.
Long Piping Design For Flexibility
Piping length between outdoor and indoor unit can be
extended up to 150 meters. The height between outdoor
unit and indoor unit can be extended up to 50 meters. The
height difference between indoor units can be as high as
15 meters. This greatly reduces constraint and offers
huge flexibility in system design.
Better Place Utilisation
MDS uses the single outdoor multiple indoors combina-
tion. This concept has greatly reduced the outdoors units
and enhances flexibility during installation.
Better Solution
Comparing to conventional chilled water
system, MDS required far less equipment.
Boilers, cooling tower are things in the past with
MDS. Thus, MDS is clearly a better solution for
new projects or even retrofit purposes.
Simple Installation
Unique piping joints and simple wiring make it possible to install MDS system quickly and easily.
t1 t2
Time
30ºC
Initial
Temperature
Setting
Temperature
25ºC
Traditional Air Conditioning
MDS System
The MDS system operates in a stepless capacity modula-
tion ranging from 10~100%. The modulation will closely
match the demand capacity whereby contributing to high
SEER ratings that no conventional air-conditioners can
achieve.
MDS System
Inverter System
Total Capacity Of Operating Indoor Unit (%)
Running Ratio Of Compressors %
0
10
20
30
40
50
60
70
80
90
100
100%
0 10 20 30 40 50 60 70 80 90 100
Rapid Cooling and Heating Capability
Intelligent Capacity Modulation
Temperature °C
48°CDB
0°CDB
15.5°CWB
-16°CWDB
50
40
30
20
10
0
-10
-20
Cooling Cycle
Heating Cycle
Height
15m
Piping
Length
150m
Height
50m
Conventional Chilled
Water System
MDS System
Only a common 2-core, screen cable wire
is required to enable communication
between outdoor and indoors.
The refnet joint is provided by the factory
in accordance with different indoor units,
which will reduce the work force at site and
save you a lot of money.
Comentarios a estos manuales