McQuay MWSS Guía para resolver problemas descargar pdf (Pagina 37)

MCQUAY Service Guide Book Controller Configuration

6.2 Multi Split Conversion

Cooling Only Model (L2.0 / L208A)

MWM-G, MCK-A/B/C/E, MCM-E, MCC-C which

are using L2 control board can be switched to

multi split units without any modification needed.

Heatpump Model (L2.0)

MWM-GR

The Multi Split mode can be selected at the slide

switch on the On/Off Switch Board; Preset at

OFF.

The outdoor coil sensor has to be removed from

the PCB as the reading is taken from the outdoor

PCB directly.

Heatpump Models (L208A)

MCK-AR/BR/CR/ER, MCM-ER, MCC-CR

The multisplit can be selected by using shunt

jumper and short jumper header MODEL_KP

between pin 1 & 2 as the picture shown below.

The outdoor coil sensor has to be removed from

the PCB as the reading is taken from the outdoor

PCB directly.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 81 82

Sin comentarios

McQuay MWSS Guía para resolver problemas Pagina 37